ALKMaps.Control.Snapping

Acts as a snapping agent while editing vector features.

Inherits from

ALKMaps.Control

Summary

ALKMaps.Control.Snapping	Acts as a snapping agent while editing vector features.
Properties
events	{ALKMaps.Events} Events instance for listeners and triggering control specific events.
Constants
DEFAULTS	Default target properties.
Properties
greedy	{Boolean} Snap to closest feature in first layer with an eligible feature.
precedence	{Array} List representing precedence of different snapping types.
resolution	{Float} The map resolution for the previously considered snap.
geoToleranceCache	{Object} A cache of geo-tolerances.
layer	{ALKMaps.Layer.Vector} The current editable layer.
feature	{ALKMaps.Feature.Vector} The current editable feature.
point	{ALKMaps.Geometry.Point} The currently snapped vertex.
Constructor
ALKMaps.Control.Snapping	Creates a new snapping control.
Functions
setLayer	Set the editable layer.
setTargets	Set the targets for the snapping agent.
addTargetLayer	Add a target layer with the default target config.
addTarget	Add a configured target layer.
removeTargetLayer	Remove a target layer.
removeTarget	Remove a target.
activate	Activate the control.
deactivate	Deactivate the control.
onSketchModified	Registered as a listener for the sketchmodified event on the editable layer.
onVertexModified	Registered as a listener for the vertexmodified event on the editable layer.
considerSnapping
testTarget
getGeoTolerance	Calculate a tolerance in map units given a tolerance in pixels.
destroy	Clean up the control.

Properties

events

{ALKMaps.Events} Events instance for listeners and triggering control specific events.

Register a listener for a particular event with the following syntax

control.events.register(type, obj, listener);

Supported event types (in addition to those from <ALKMaps.Control.events>)

beforesnap	Triggered before a snap occurs. Listeners receive an event object with point, x, y, distance, layer, and snapType properties. The point property will be original point geometry considered for snapping. The x and y properties represent coordinates the point will receive. The distance is the distance of the snap. The layer is the target layer. The snapType property will be one of “node”, “vertex”, or “edge”. Return false to stop snapping from occurring.
snap	Triggered when a snap occurs. Listeners receive an event with point, snapType, layer, and distance properties. The point will be the location snapped to. The snapType will be one of “node”, “vertex”, or “edge”. The layer will be the target layer. The distance will be the distance of the snap in map units.
unsnap	Triggered when a vertex is unsnapped. Listeners receive an event with a point property.

Constants

DEFAULTS

Default target properties.

Properties

greedy

{Boolean} Snap to closest feature in first layer with an eligible feature. Default is true.

precedence

{Array} List representing precedence of different snapping types. Default is “node”, “vertex”, “edge”.

resolution

{Float} The map resolution for the previously considered snap.

geoToleranceCache

{Object} A cache of geo-tolerances. Tolerance values (in map units) are calculated when the map resolution changes.

layer

{ALKMaps.Layer.Vector} The current editable layer. Set at construction or after construction with setLayer.

feature

{ALKMaps.Feature.Vector} The current editable feature.

point

{ALKMaps.Geometry.Point} The currently snapped vertex.

Constructor

ALKMaps.Control.Snapping

Creates a new snapping control. A control is constructed with an editable layer and a set of configuration objects for target layers. While the control is active, dragging vertices while drawing new features or modifying existing features on the editable layer will engage snapping to features on the target layers. Whether a vertex snaps to a feature on a target layer depends on the target layer configuration.

Parameters

options

{Object} An object containing all configuration properties for the control.

Valid options

layer	{ALKMaps.Layer.Vector} The editable layer. Features from this layer that are digitized or modified may have vertices snapped to features from any of the target layers.
targets	{Array(Object \| ALKMaps.Layer.Vector)} A list of objects for configuring target layers. See valid properties of the target objects below. If the items in the targets list are vector layers (instead of configuration objects), the defaults from the <defaults> property will apply. The editable layer itself may be a target
layer	allowing newly created or edited features to be snapped to existing features from the same layer. If no targets are provided the layer given in the constructor (as layer) will become the initial target.
defaults	{Object} An object with default properties to be applied to all target objects.
greedy	{Boolean} Snap to closest feature in first target layer that applies. Default is true. If false, all features in all target layers will be checked and the closest feature in all target layers will be chosen. The greedy property determines if the order of the target layers is significant. By default, the order of the target layers is significant where layers earlier in the target layer list have precedence over layers later in the list. Within a single layer, the closest feature is always chosen for snapping. This property only determines whether the search for a closer feature continues after an eligible feature is found in a target layer.

Valid target properties

layer	{ALKMaps.Layer.Vector} A target layer. Features from this layer will be eligible to act as snapping target for the editable layer.
tolerance	{Float} The distance (in pixels) at which snapping may occur. Default is 10.
node	{Boolean} Snap to nodes (first or last point in a geometry) in target layer. Default is true.
nodeTolerance	{Float} Optional distance at which snapping may occur for nodes specifically. If none is provided, <tolerance> will be used.
vertex	{Boolean} Snap to vertices in target layer. Default is true.
vertexTolerance	{Float} Optional distance at which snapping may occur for vertices specifically. If none is provided, <tolerance> will be used.
edge	{Boolean} Snap to edges in target layer. Default is true.
edgeTolerance	{Float} Optional distance at which snapping may occur for edges specifically. If none is provided, <tolerance> will be used.
filter	{ALKMaps.Filter} Optional filter to evaluate to determine if feature is eligible for snapping. If filter evaluates to true for a target feature a vertex may be snapped to the feature.
minResolution	{Number} If a minResolution is provided, snapping to this target will only be considered if the map resolution is greater than or equal to this value (the minResolution is inclusive). Default is no minimum resolution limit.
maxResolution	{Number} If a maxResolution is provided, snapping to this target will only be considered if the map resolution is strictly less than this value (the maxResolution is exclusive). Default is no maximum resolution limit.

Functions

setLayer

setLayer: function( layer )

Set the editable layer. Call the setLayer method if the editable layer changes and the same control should be used on a new editable layer. If the control is already active, it will be active after the new layer is set.

Parameters

layer

{ALKMaps.Layer.Vector} The new editable layer.

setTargets

setTargets: function( targets )

Set the targets for the snapping agent.

Parameters

targets

{Array} An array of target configs or target layers.

addTargetLayer

addTargetLayer: function( layer )

Add a target layer with the default target config.

Parameters

layer

{ALKMaps.Layer.Vector} A target layer.

addTarget

addTarget: function( target )

Add a configured target layer.

Parameters

target

{Object} A target config.

removeTargetLayer

removeTargetLayer: function( layer )

Remove a target layer.

Parameters

layer

{ALKMaps.Layer.Vector} The target layer to remove.

removeTarget

removeTarget: function( target )

Remove a target.

Parameters

target

{Object} A target config.

Returns

{Array} The targets array.

activate

activate: function()

Activate the control. Activating the control registers listeners for editing related events so that during feature creation and modification, moving vertices will trigger snapping.

deactivate

deactivate: function()

Deactivate the control. Deactivating the control unregisters listeners so feature editing may proceed without engaging the snapping agent.

onSketchModified

onSketchModified: function( event )

Registered as a listener for the sketchmodified event on the editable layer.

Parameters

event

{Object} The sketch modified event.

onVertexModified

onVertexModified: function( event )

Registered as a listener for the vertexmodified event on the editable layer.

Parameters

event

{Object} The vertex modified event.

considerSnapping

considerSnapping: function( point,
loc )

Parameters

point	{ALKMaps.Geometry.Point} The vertex to be snapped (or unsnapped).
loc	{ALKMaps.Geometry.Point} The location of the mouse in map coords.

testTarget

testTarget: function( target,
loc )

Parameters

target	{Object} Object with target layer configuration.
loc	{ALKMaps.Geometry.Point} The location of the mouse in map coords.

Returns

{Object} A result object with rank, dist, x, and y properties. Returns null if candidate is not eligible for snapping.

getGeoTolerance

getGeoTolerance: function( tolerance,
resolution )

Calculate a tolerance in map units given a tolerance in pixels. This takes advantage of the geoToleranceCache when the map resolution has not changed.

Parameters

tolerance	{Number} A tolerance value in pixels.
resolution	{Number} Map resolution.

Returns

{Number} A tolerance value in map units.

destroy

destroy: function()

Clean up the control.